LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (Passenger Protection, Airbags, Seat Belts (Convertible)) >> 69 Passenger Protection, Airbags, Seat Belts >> Thorax Airbags >> Front Thorax Airbag With Igniter, Removing And Installing >> Installing

Front Thorax Airbag With Igniter, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Install in reverse order of removal. Note the following:

Fig 1: Identifying Connector, Side Airbag, Wire And Screw
GWWM69-10071Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hook the wire -3- in the tabs -arrows-.

-- Connect the connectors -1- to the thorax airbag -2-.

-- Switch the ignition on.

WARNING:

Make sure that no persons are in the vehicle.

-- Connect the battery ground cable with the ignition switched on. Refer to BATTERY, DISCONNECTING AND CONNECTING .