LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (Passenger Protection, Airbags, Seat Belts (Convertible)) >> 69 Passenger Protection, Airbags, Seat Belts >> Driver Side Airbag >> Airbag Unit With Igniter, Removing And Installing >> Notes

Airbag Unit With Igniter, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE:

The following describes removing and installing  the airbag unit inside a multifunction steering wheel.

The screwdriver mentioned in the following should be about 175 mm long and have a blade width of 7 mm.

WARNING:
  • Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to SAFETY PRECAUTIONS .
  • Observe the special information regarding driver and front passenger airbags. Refer to AIRBAG SAFETY PRECAUTIONS .
scientia non olet · About LEMON Manuals