Driver Front Airbag Crash Sensor -G283-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

WARNING:

Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to SAFETY PRECAUTIONS .

-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Unlock the connector lock.

Fig 1: Identifying Installation Of Bolt And Driver Front Airbag Crash Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- from the Driver Front Airbag Crash Sensor -G283- -3-.

-- Remove the bolt -2- and the Driver Front Airbag Crash Sensor -G283- -3-.