Parking Brake Lever Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Unclip the trim from the front of the parking brake lever -1- -arrow-.
-- Set the parking brake.
-- Roll the parking brake lever trim -1- on the parking brake lever -2- up and over the handle.
-- Carefully unclip and remove the parking brake lever trim -1- on the handle -arrow- using the : 3409 .
-- Position the : T10055 -1- on the side of the handle -2-.
-- Remove the handle -2- from the parking brake lever -3- using the : T10055 .