Sill Panel Cover
WARNING: This page is about a different variant/trim than selected.
NOTE:
The illustration shows the left side. The right side is identical.
- Clamping Nut
- Clip in the rear wheel housing liner.
- Sill Panel Cover
- Removing:
-- Remove the bolts -3-.
-- Remove the sill panel cover downward from the rear wheel housing liner.
- Installing
-- Slide the sill panel onto the rear wheel housing liner from underneath.
-- Install the bolts -3- and tighten.
- Removing:
- Bolt
- 2 Nm
- Quantity: 3