Overview - Underbody Panels, Sedan
WARNING: This page is about a different variant/trim than selected.
NOTE:
The illustration shows the right side. The left side is identical.
- Underbody Trim Panel
- Removing:
-- Remove the nuts -2-.
-- Pull the underbody panel toward the rear off the cover -3- and remove it.
- Removing:
- Nut
- 2 Nm
- Held in place by the tabs on the underbody trim panel
- Quantity: 8
- Cover
- Removing:
-- Turn the cover 90° counterclockwise.
-- Remove the cover from the mount.
- Removing: