Spoiler, Removing And Installing, Sedan: Notes
WARNING: This page is about a different variant/trim than selected.
Materials
NOTE:
Refer to the parts information for the material part numbers.
- One-part window adhesive 1)2)3)
- Activator 1)
- Glass/Paint primer 1)
- Cleaning Solution 1)
- Primer applicator 1)
- Adhesive remover 1)
- Cutting Wire
1) Follow the manufacturer processing guidelines supplied in the packaging.
2) Note the minimum curing time. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
3) Heat according to manufacturer's instructions using the Cartridge Heater: VAG1939A .