LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Exterior Equipment (Convertible)) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Trim Molding, Removing And Installing >> Removing And Installing The Convertible Top Compartment Trim Molding >> Installing

Removing And Installing The Convertible Top Compartment Trim Molding: Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Rubber Piece And Intermediate Plate
GWWM66-10065Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Join the trim moldings -1 and 4-.

-- Install the trim moldings on the flange -2- and on the intermediate plate -3-.

Fig 2: Clips, Trim Strips And Rubber Clips
GWWM66-10064Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the clips -3- and the rubber clips -4-.

-- Install the left and right side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, CONVERTIBLE .