Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the battery tray. Refer to BATTERY TRAY, REMOVING AND INSTALLING (CONVERTIBLE) .

-- Remove the connector -3- from the Secondary Air Injection Sensor 1 -G609-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Squeeze the locking ring on both sides together and remove the connecting pipe -2-.

-- Push the coolant pipe -2- gently aside.

Fig 1: Locating Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the Secondary Air Injection Solenoid Valve -N112-.