Rear Muffler, Removing And Installing, Multi-Link Suspension: Installing
WARNING: This page is about a different variant/trim than selected.
NOTE:
A second technician is required for tightening the rear clamping sleeve (clamping sleeve repair).
-- Secure the front muffler in the mounts. The front clamp remains loosely connected to pipes.
-- Align the rear muffler horizontally and hold it in this position.
-- Position the rear clamping sleeve with both outer markings and tighten.
-- Align the exhaust system free of tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
Cabriolet
-- Install the subframe crossbrace -3-. Refer to TENSION STRUTS, REMOVING AND INSTALLING (CONVERTIBLE) CROSSBRACE .