Overview - Emissions Control System

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Emissions Control

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bracket
- For catalytic converter
- To subframe
Catalytic Converter
- With front exhaust pipe
- Protect catalytic converter from shocks and impact stress
- Removing and Installing. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .
V-Clamp
- Replace after removing.
- Tightening specification. Refer to OVERVIEW - TURBOCHARGER
Seal
- Replace after removing.
Turbocharger
- Removing and Installing. Refer to TURBOCHARGER .
Front Clamping Sleeve
- Before tightening, align the exhaust system without tension. Refer to CLAMPING SLEEVE INSTALLATION POSITION .
- Tighten threaded connections evenly.
Bolt
- 23 Nm