Mass Airflow Sensor -G70-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Open the clamps -1 and 2- and remove the connecting pipe -3-.

Fig 1: Identifying Connecting Pipe And Clamps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Release the connector on the Mass Airflow Sensor -G70- and remove.

-- Remove the bolt -1-.

Fig 2: Identifying Mass Airflow Sensor With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the Mass Airflow Sensor -- -2- in the direction of -arrow B- and remove.