LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Fuel Preparation And Injection [DDSA,DDSB] (Convertible)) >> 24 Fuel Preparation And Injection >> Injection System >> High Fuel Pressure, Reducing

High Fuel Pressure, Reducing

WARNING: This page is about a different variant/trim than selected.
CAUTION:

The fuel system is under pressure.

Risk of injury from fuel spraying out.

- Wear protective eyewear.

- Wear safety gloves.

- Reduce the pressure: place clean cloths around the connection point and carefully open the connection point.

High Fuel Pressure, Reducing: 

-- Turn on the ignition and select the following menu items on the Vehicle Diagnostic Tester:

-- Switch off the ignition.

The fuel rail will continue to be filled with fuel, but it will no longer be under high pressure.

CAUTION:

The fuel system is under pressure.

Risk of injury from fuel spraying out.

- Wear protective eyewear.

- Wear safety gloves.

- Reduce the pressure: place clean cloths around the connection point and carefully open the connection point.

-- After reducing high fuel pressure, place a clean cloth around the connection and open the high pressure system >>immediately<<. Absorb the discharged fuel.

NOTE:

If the high pressure system is not opened immediately, the pressure will increase because of post-heating.

The ignition can no longer be switched on, otherwise the pressure will increase again.