LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 41 (Fuel Preparation And Injection [DDSA,DDSB] (Convertible)) >> 24 Fuel Preparation And Injection >> Fuel Injectors >> Fuel Rail, Removing And Installing >> Installing

Fuel Rail, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

NOTE:

Replace the support ring for the fuel injectors after removing.

If when removing the fuel rail the fuel injectors remain installed in the cylinder head the O-rings and spacer ring from the repair kit must be installed.

When fuel injectors are removed with the fuel rail, the complete repair kit with the combustion chamber seal must be installed. Refer to FUEL INJECTORS, REMOVING AND INSTALLING .

-- Install the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals