Special Tools

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Dial Gauge Holder: VW387

Fig 1: Dial Gauge Holder
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Dial Gauge - 0-10mm: VAS6079

Fig 2: Dial Gauge
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 3: Identifying Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Assembly Tool: T10352A
Counterhold - Vibration Damper: T10355
Chain Tensioner Lever: T40243
Tensioner Locking Tool: T40267
Camshaft Locks: T40271
Adapter: T40266
Counterhold - Multiple Use: T10172A with Counterhold - Kit - Adapter 2: T10172/2

Fig 4: Counterhold - Kit - Multiple Use T10172 With Camshaft Lock T10172/11
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge Set: VAS6341

Fig 5: Identifying Dial Gauge Set VAS 6341
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Dial Gauge Adapter: T10170 A

Fig 6: Dial Gauge Adapter T10170A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 7: Identifying Special Tools - Camshaft Timing Chain (With New Tools)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Assembly Tool: T10352/2
Counterhold - Vibration Damper: T10355
Locking Pin (3 pc.): T40011
Chain Tensioner Lever: T40243
Tensioner Locking Tool: T40267
Camshaft Locks: T40271
Adapter: T40266

Fig 8: Adaptor
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Vibration Damper Assembly Tool: T10531

Fig 9: Assembly Tool Set T10531
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Individual components of the Vibration Damper Assembly Tool: T10531 :

Vibration Damper Assembly Tool - Counterhold Tool: T10531/1
Vibration Damper Assembly Tool - Tensioning Pins: T10531/2
Vibration Damper Assembly Tool - Turning Over Tool: T10531/3
Vibration Damper Assembly Tool - Knurled Nut: T10531/4
Engine Bung Set: VAS6122

Fig 10: Engine Bung Set
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.