Vibration Damper, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Counterhold - Vibration Damper: T10355
- Vibration Damper Assembly Tool: T10531
Individual components of the Vibration Damper Assembly Tool: T10531 :
- Vibration Damper Assembly Tool - Counterhold Tool: T10531/1
- Vibration Damper Assembly Tool - Tensioning Pins: T10531/2
- Vibration Damper Assembly Tool - Turning Over Tool: T10531/3
- Vibration Damper Assembly Tool - Knurled Nut: T10531/4
NOTE:
The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.