LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Crankshaft, Cylinder Block [DDSA,DDSB] (Convertible)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Fig 1: Engine Support - Tightening Specification and Sequence
GWWA10-11481Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals