LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Hood, Lids (Convertible)) >> 55 Hood, Lids >> Rear Lid >> Latch, Removing And Installing >> Rear Lid Lock, Removing And Installing, Sedan >> Installing

Rear Lid Lock, Removing And Installing, Sedan: Installing

WARNING: This page is about a different variant/trim than selected.

-- Attach the rear lid latch -1- to the rear lid and install the bolts -2-.

Fig 1: Identifying Rear Lid Lock Components
GWWM55-10103Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect the connector -3- to the latch -1-.

-- Install the rear lid lock trim. Refer to REAR LID LOCK TRIM (CONVERTIBLE) .

-- Install the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL (CONVERTIBLE) .

NOTE:

Perform a function test on the unlocking components before closing the rear lid.