LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Hood, Lids (Convertible)) >> 55 Hood, Lids >> Rear Lid >> Hinges, Removing And Installing >> Removing

Hinges, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Rear Lid Hinge Components
GWWM55-10094Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the rear lid -5-. Refer to REAR LID, REMOVING AND INSTALLING, SEDAN .

-- Lower the headliner in the rear section (do not remove). Refer to HEADLINER, REMOVING AND INSTALLING (CONVERTIBLE) .

-- Remove the nuts -4- and remove the hinge -1- as well as the washer -3-.