LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Hood, Lids (Convertible)) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Adjusting Element, Removing And Installing >> Installing

Adjusting Element, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal.

-- Check that the grommet -2- and the connector -1- are in their correct positions.

Fig 1: Identifying Fuel Door Actuator Cable And Grommet
GWWM55-10110Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .