Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Move the Fuel Gauge Sensor -G- slightly to the side and upward at the same time.

Fig 1: Identifying Fuel Level Sensor G Pulled Slightly To Side And Simultaneously Upward

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the tabs in direction of -arrows- slightly to the side if the sensor does not unlock.

Fig 2: Fuel Level Sensor Electrical Wires

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Write down the cable color coding for reinstallation.

-- Disconnect the connectors -1 through 3- and bend back the hooks on the connector.

Fig 3: Fuel Level Sensor Electrical Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.