EVAP Canister System Connection Plan, EVAP Canister In Right Rear Wheel Housing

Fig 1: Exploded View Of EVAP Canister System Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. EVAP Canister
   • Component location: under the wheel housing liner in the right rear wheel housing
   • Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
2. Air Filter
   • For the Leak Detection Pump -V144-
3. Leak Detection Pump -V144-
   • Vehicles with engine codes (CBTA, CBUA, CCTA, CBFA, CCZA)
   • Component location: under the wheel housing liner in the right rear wheel housing
   • Checking using the Vehicle Diagnostic Tester.
   • Removing and Installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING .
4. Breather Line
   • From the filler neck to the EVAP canister
5. Filler Neck
6. Fuel Supply Line
   • Black
7. Breather Line
   • White
8. EVAP Canister Purge Regulator Valve 1 -N80-
   • Checking using the Vehicle Diagnostic Tester.
9. Throttle Valve Control Module -J338-