LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Fuel Supply [CBTA, CBUA, CCTA, CBFA, CPLA, CPPA, CPRA, CPKA, DDSA] (Convertible)) >> 20 Fuel Supply >> Connector Couplings >> Connector Couplings, Disconnecting >> Connector Coupling Allocation

Connector Coupling Allocation

WARNING: This page is about a different variant/trim than selected.
NOTE:

The connector couplings for fuel, vacuum and bleeder lines are color-coded. There is either a colored dot on the connector coupling or the release button is the corresponding color.

The connector couplings must >>audibly<< engage when locking.

Pull on the connector coupling to check for secure fit.

Connector Coupling Color Coding on Connector Coupling
Fuel supply Black
Fuel Return Line Blue
Bleeder White beige
Vacuum Green
CAUTION:

The fuel system is under pressure.

Risk of injury from fuel spraying out.

  • Wear protective eyewear.
  • Wear safety gloves.
  • Reduce the pressure: place clean cloths around the connection point and carefully open the connection point.

Version 1 

Fig 1: Coupling
GWWN20-10884Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release buttons -arrows-.

Opening 

Fig 2: Identifying Lever
GWWN20-10907Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is necessary to counterhold the fuel separating point -1- inside the engine compartment.

-- Insert the : T10468  between the heat shield and the stop -arrow- for the fuel line -2- and counterhold it.

Continue for all separation points on the fuel system:

Fig 3: Identifying Coupling
GWWN20-10883Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector coupling -1- in the direction of the -arrow A-.

-- Press the release buttons and hold it down.

-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of the -arrow B-.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 2 

Fig 4: Coupling With A Pull Release
GWWN20-10882Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with pull release -arrow- :

Opening 

Fig 5: Coupling -1- Off The Fuel Line
GWWN20-10885Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector coupling -1- in the direction of the -arrow A-.

-- Pull the pull release -2- in the direction of the -arrow B-.

-- Pull the connector coupling -1- off the fuel line -3- in the direction of the -arrow B-.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 3 

Fig 6: Coupling With A Release Button
GWWN20-10898Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with front button -arrow- :

Opening 

-- Press the release button -arrow- and remove the connector couplings.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 4 

Fig 7: Coupling With The Release Buttons On The Right And Left Sides
GWWN20-10897Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release button -arrows- :

Opening 

-- Push the connector coupling in the direction of the -arrow A-.

-- Press the release buttons -arrows- and remove the connector coupling.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 5 

Fig 8: Coupling With The Release Buttons On The Right And Left Sides
GWWN20-10899Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release buttons -arrows- :

Opening 

-- Press the release buttons -arrows- and remove the connector coupling.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 6 

Fig 9: Identifying Coupling
GWWN20-10946Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release buttons -arrows- :

Opening 

-- Press the connector coupling -1- in the direction of the -arrow- and hold it down.

-- Press the release buttons -arrows- and remove the connector coupling.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

Version 7 

Fig 10: Connector Coupling With Right And Left Unlock Buttons
GWWA20-10880Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling -1- with right and left release buttons -2- :

Opening 

-- Press the connector coupling -1- in direction of the -arrow A- and hold it down.

-- Push the release buttons -2- in the direction of -arrow B- and remove the connector coupling -1-.

Note the color coding when installing. Refer to Connector Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to check for secure fit.

scientia non olet · About LEMON Manuals