Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the steering column cover -arrows-.

Fig 1: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry off the cap -3- using a screwdriver.

Fig 2: Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Disconnect the connector -1-.

-- Insert the : T10238 / : T10240 all the way into the opening provided, as illustrated below.

Fig 3: Identifying Release Tool T10238

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the accelerator pedal module.