Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect the connector -1- to the accelerator pedal module -4-.

-- Push the accelerator pedal module onto the retaining pin -5-.

-- Insert the centering pin -6- into the hole on the underbody.

-- Secure the accelerator pedal module with the bolt -2-.

-- Install the cap -3-.

-- Install the steering column cover -arrows-.

Fig 2: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.