Transmission Fluid Screen, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Oil Filter Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lightly coat the seals on the transmission fluid screen suction collar with ATF.

-- Replace the transmission fluid screen if the seals are loose or faulty.

-- Mount the transmission fluid screen -A- on the valve body and tighten the bolts -arrows-.

-- Install the transmission fluid pan. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .

-- Fill the ATF, and check the ATF level and add ATF if necessary. Refer to ATF .