Overview - ATF Cooler, Round Version

WARNING: This page is about a different variant/trim than selected.

Fig 1: ATF Cooler, Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Transmission Housing
O-ring
- Replace after removing
ATF Cooler
- Removing and Installing. Refer to ATF COOLER, REMOVING AND INSTALLING, ROUND VERSION .
- Installation position. Refer to Fig 2
O-ring
- Replace after removing
Washer
Plate Spring
- Installation position: The convex side faces toward the bolt ) OVERVIEW - ATF COOLER, ROUND VERSION - List Item: Bolt
Bolt
- 36 Nm

ATF Cooler, Installation Position

Fig 2: Identifying ATF Cooler At Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the tab -arrow B- into the transmission housing cut-out when installing the ATF cooler -1-.