Desiccant Bag/Dryer Cartridge, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- Replace the O-ring after removing .
-- Coat the O-ring with refrigerant oil before installing .
Vehicles with Refrigerant R134a
-- Fill the refrigerant circuit. Refer to REFRIGERANT, FILLING IN A/C Service Station .
-- Start the A/C system after charging. Refer to A/C SYSTEM, OPERATING AFTER CHARGING .
Vehicles with Refrigerant R1234yf
-- Charge the refrigerant circuit. Refer to the appropriate service information .
-- Start the A/C system after charging. Refer to the appropriate service information .