Tie Rod End, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Loosen the wheel bolts.

-- Raise the vehicle.

-- Remove the wheel.

-- Loosen the nut -1-.

Fig 1: Loosening Tie Rod End Nut

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Mark the position of the tie rod end on the tie rod.

-- Loosen the nut -2- from the tie rod end, but do not remove it.

CAUTION:

To protect the thread, screw the nut on the pin several turns.

-- Remove the tie rod from the wheel bearing housing and remove the nut.

3 - : T10187

-- Remove the tie rod end from the tie rod.