Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
- Refer to OVERVIEW - STEERING GEAR
- Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT
- Refer to OVERVIEW - SUBFRAME
- Exhaust system bracket to subframe. Refer to OVERVIEW - MUFFLER (CPLA, CPPA, CPKA, CPRA) or OVERVIEW - MUFFLER (DDSA, DDSB) .
- Clamping sleeve tightening specification. Refer to CLAMPING SLEEVE INSTALLATION POSITION (CPLA, CPPA, CPKA, CPRA) or CLAMPING SLEEVE INSTALLATION POSITION (DDSA, DDSB) .
| Component | Tightening Specification |
|---|---|
| Union nut, pressure/return line to the steering gear | 32 Nm |