Suspension Strut, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following:

-- Secure the : VAS6931 using the : T10149 to the wheel hub with a wheel bolt.

Fig 1: Dimension Between Wheel Hub Center & Lower Edge Of Wheel Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the suspension strut on the wheel bearing housing and secure it with the internal multi-point bolt and a new nut.

The point of the internal multi-point bolt must face the direction of travel

-- Remove the :3424 .