Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT
Refer to OVERVIEW - SUBFRAME
Refer to OVERVIEW - STEERING COLUMN
Refer to OVERVIEW - STEERING GEAR
Pendulum support bolts. Refer to ASSEMBLY MOUNT .
Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
Exhaust system bracket to subframe. Refer to ASSEMBLY MOUNT .
Clamping sleeve tightening specification. Refer to CLAMPING SLEEVE INSTALLATION POSITION .