LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Front Suspension (Convertible)) >> 40 Front Suspension >> Drive Axle >> Outer CV Joint, Checking >> Installing

Outer CV Joint, Checking: Installing

WARNING: This page is about a different variant/trim than selected.

-- Press in half of the total grease amount (40 grams) into joint body.

-- Insert cage with hub into joint body.

-- Press in the opposite facing balls one after the other, and the old ball hub position to the ball cage and to the joint housing must be replicated.

-- Install new circlip into the hub.

-- Distribute the remaining grease in the joint boot.

scientia non olet · About LEMON Manuals