Drive Axle, Disassembling And Assembling, CV Joint VL100: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Press Plate: VW401
- Press Plate: VW402
- Press Piece - Rod: VW408A
- Press Piece - Rod: VW411
- Press Piece - 37mm: VW416B
- Press Piece - Multiple Use: VW447H
- Circlip Pliers: VW161A
- Torque Wrench 1331 5-50Nm: VAG1331
- Torque Wrench 1332 40-200Nm: VAG1332
- Clamping Pliers: VAG1682A
- Tripod Joint Tool: T10065
- Slide Hammer Set: VW771
- Puller - Drive Axle: T10382