LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Rear Suspension (Convertible)) >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Trailing Arm With Mounting Bracket, Removing And Installing >> Determining the Installation Position of Mounting Bracket Relative to Trailing Arm

Determining the Installation Position of Mounting Bracket Relative to Trailing Arm

WARNING: This page is about a different variant/trim than selected.

Dimension -a- is 34 ±1 mm.

Fig 1: Installation Position Of Mounting Bracket To Trailing Link
GWWA42-0448Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Mounting Bracket
  2. Trailing Arm

-- When dimension -a- has been adjusted, tighten bolt.

scientia non olet · About LEMON Manuals