Spring, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Loosen the wheel bolts.

-- Raise the vehicle.

-- Remove the wheel.

-- Insert the : VAG1752 -3-.

Fig 1: Identifying Coil Spring Seated In Compressor VAG 1752/4

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

Make sure the coil spring is seated correctly in the : VAG1752/3A -2- (danger of accident).

-- Tension the coil spring and remove it.

NOTE:

Use a wrench or a reversible ratchet to tighten the spring compressor.