Overview - Suspension Strut, Shock Absorber, Spring
WARNING: This page is about a different variant/trim than selected.
- Upper Spring Support
- Coil Spring
- Note the color code
- Allocation. Refer to the Parts Information.
- There are different versions of the suspension. Refer to VEHICLE DATA LABEL
- Surface of spring coil may not be damaged
- Removing and installing . Refer to SPRING, REMOVING AND INSTALLING
- Lower Spring Support
- Spring end rotated up to stop
- Bolt
- 130 Nm +90°
- Bolt
- 50 Nm +45°
- Replace after removing .
- Shock Absorber
- Removing and installing . Refer to SHOCK ABSORBER, REMOVING AND INSTALLING
- There are different versions of the suspension. Refer to VEHICLE DATA LABEL
- Lower Transverse Link
- Removing and installing . Refer to LOWER TRANSVERSE LINK, REMOVING AND INSTALLING
- Wheel Bearing Housing
- Removing and installing . Refer to WHEEL BEARING HOUSING, REMOVING AND INSTALLING