SUBFRAME, Securing

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

: T10096 , Installing

-- Move the : VAS6931 under the subframe and secure it using the tensioning strap.

Fig 1: Engine/Transmission Jack V.A.G 1383 A With Universal Transmission Support V.A.G 1359/2 Below Subframe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unscrew one of the front bolts of the subframe -arrow-.

Fig 2: Identifying Front Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the : T10096 -1-.

Fig 3: Identifying Locating Pins

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The : T10096 may only be tightened to a maximum of 20 Nm, otherwise the threads of the locating pins will be damaged.

-- The same procedure must be performed for the second front bolt of the subframe.

The subframe position is now secured.