Upper Transverse Link, Removing And Installing: Removing

-- Loosen the wheel bolts.

-- Raise the vehicle.

-- Remove the wheel.

-- Remove the coil spring. Refer to SPRING, REMOVING AND INSTALLING .

-- Disengage the speed sensor wire -arrow A- on top of the transverse link.

Fig 1: Identifying Speed Sensor Wiring At Upper Transverse Link

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1-.

-- Mark the location of the centering bolt -arrow- in relation to the subframe, for example using a felt-tip pen.

Fig 2: Locating Eccentric Bolt On Subframe

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow-.

-- Remove upper transverse link.