Lock Carrier, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Lock Carrier

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the lock carrier -1- to the longitudinal members -2-.

-- Install the :T10093 on the left and right sides.

Further installation is the reverse order of removal.

-- Align the lock carrier with the attachments -1- on the longitudinal members and between the fenders. Refer to Body Gap Dimensions; Body Front .

NOTE:

Make sure that the charge air cooler pressure hoses are reinstalled correctly.

The hoses and lines must not be pinched.