General Description For Start/Stop System
WARNING: This page is about a different variant/trim than selected.
General Description
The Start/Stop System reduces fuel consumption by turning off the engine when the vehicle is at a standstill and turning the engine back on when the driver starts to drive. The Stop/Start System works automatically when the vehicle is driven for approximately four seconds at a minimum of 3 km/h.
Malfunction Recognition and Malfunction Indicator
The software in the Engine Control Module -J623- controls the Start/Stop System.
The Engine Control Module -J623- is equipped with OBD.
For troubleshooting, use the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.