Front Information Display Control Head -J685- KNOB, REPLACING

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Pliers: T40172C

NOTE:

Replacing the knob on the Front Information Display Control Head -J685- is only described for one version. Replacing the knob on the Front Information Display Control Head -J685- for all other versions takes place in the same way.

Replacing the knob on the Front Information Display Control Head -J685- takes place while installed.

Procedure

-- Remove the knob -1- using the Pliers: T40172C -2- straight in the direction of -arrow- from the mount.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push on the new knob opposite the direction of -arrow- straight on the mount on the Front Information Display Control Head -J685-.

The knob must engage securely with the mount on the Front Information Display Control Head -J685-.