Traffic Data Antenna, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Switch off the ignition and all electrical equipment and remove the ignition key.
The Traffic Data Antenna -R173- is in the upper instrument panel on the instrument cluster bracket.
-- Remove the instrument cluster. Refer to INSTRUMENT CLUSTER -KX2-, REMOVING AND INSTALLING .
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the clips -arrows- and then remove the Traffic Data Antenna -R173- -1- together with the wire on the Chip Card Reader Control Module -J676-.