Wiring Harness Repair Set: VAS1978A

WARNING: This page is about a different variant/trim than selected.

The new Wiring Harness Repair Set: VAS1978A makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped are used and can be connected to the vehicle-specific wiring harness with four different types of crimp connectors. A new Wiring Harness Repair - Crimping Plier - Base Tool: VAS1978/1-2 with exchangeable Wiring Harness Repair - Crimping Head -.35-2.5mm: VAS1978/1-1 or Wiring Harness Repair Set - Crimping Head - 4-6mm: VAS1978/2A and a Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A for shrinking the crimp connectors provide a trouble-free electrical connection.

Wiring Harness Repair Set VAS1978A

Fig 1: Identifying Wiring Harness Repair Set (VAS 1978A)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Additional information:

Refer to Wiring Harness Repair Set: VAS1978B Operating Instructions.

The Wiring Harness Repair Set: VAS1978A was replaced by the Wiring Harness Repair Set: VAS1978B .