Crimping Pliers With Insert
WARNING: This page is about a different variant/trim than selected.
The Crimping Pliers: VAS1978/1 , with the Crimping Pliers - Insert 2: VAS1978/2 , is a component of the Wiring Harness Repair Set: VAS1978 /Wiring Harness Repair Set: VAS1978A /Wiring Harness Repair Set: VAS1978B and is used to crimp the crimp connectors during the wiring harness repair.
| Color of Crimp Connectors | Color of Crimping Slot | Wire Cross-Section |
|---|---|---|
| Yellow | Yellow | 0.35 mm2 |
| Red | Red | 0.5 mm2 through 1.0 mm2 |
| Blue | Blue | 1.5 mm2 through 2.5 mm2 |
| Yellow | Yellow | 4.0 mm2 through 6.0 mm2 |
NOTE:
The Wiring Harness Repair - Crimping Plier - Base Tool: VAS1978/1-2 can also be used together with the Wiring Harness Repair - Crimping Head -.35-2.5mm: VAS1978/1-1 or Wiring Harness Repair Set - Crimping Head - 4-6mm: VAS1978/2A to crimp the connections as an alternative.
Always be sure to use the correct crimping slot for the crimp connector used.
Do not crimp wire insulation.