Fiber-Optic Cable, Disconnecting From Wiring Harness Connector: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Install the fiber-optic cable according the identification.

NOTE:

Push the corrugated tube into the connector housing until it audibly engages.

Seal the open fiber-optic cable connector -2- with : VAS6223/9 -1-.

Fig 1: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The protective cap prevents contamination of or mechanical damage to the front surface of the fiber-optic cable which would impair light transmission.