Tires, Mounting

WARNING: This page is about a different variant/trim than selected.

Special Tools And Workshop Equipment Required

-- Using the :VAS6459 -1-, insert a new tire valve.

Fig 1: Identifying VAS -6459- To Install New Tire Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the valve insert.

-- Inflate tire to approximately 3 to 4 bar (43.51 to 58.01 psi), tire bead must slip audibly over rim hump when doing this.

-- Install the valve insert.

-- Check the tire pressure.

-- Balance the tire.