LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information) (Convertible)) >> 44 Wheels, Tires And Wheel Alignment >> Tires, Mounting >> Tire Sealant, Removing

Tire Sealant, Removing

WARNING: This page is about a different variant/trim than selected.

-- Place the wheel on a flat surface.

-- Remove the valve insert.

CAUTION:

Tire sealant is harmful to health.

Eye and skin irritation as well as allergies are possible.

- Wear safety gloves.

- Wear protective eyewear.

-- Using a drill or cutting bit, carefully drill a hole in the tire shoulder area.

Fig 1: Draining Sealant From Drilled Hole In Tire
GWWN44-0159Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Hold the wheel over a drip tray and let the sealant flow out.

-- Remove the tire from the rim.

-- Clean the rim.