Valve, Removing And Installing, Rubber Valve

WARNING: This page is about a different variant/trim than selected.

-- Using the Valve Fitting Tool : VAS6459 -1-, insert a new tire valve.

Fig 1: Identifying VAS -6459- To Install New Tire Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the valve insert.

-- Inflate the tire to approximately 3 to 4 bar (43.5 to 58 PSI); the tire bead must slip audibly over the rim hump when doing this.

-- Install the valve insert.

-- Check the tire pressure for specified pressure.

-- Balance the tire.