LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information) (Convertible)) >> 44 Wheels, Tires And Wheel Alignment >> Disc Wheel (Rim), Information >> Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing >> Installing

Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Hold the cap -1- flush against the opening in the aluminum rim.

Fig 1: Hold Cap Flush Against The Opening In The Aluminum Rim
GWWN44-10561Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Line up the Volkswagen logo on the cap with the valve so that the logo is centered over the valve -2-.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap is secure inside the aluminum rim.

scientia non olet · About LEMON Manuals